How To Pass Driving Test NSW

Over the years the driving test and licensing requirements have changed. With each change making it harder for you to get a drivers licence. Your best chance of passing is to Learn How to Pass the Driving Test NSW.

In New South Wales, the driving test is designed to evaluate your proficiency in controlling a vehicle, making sound decisions, and adhering to road safety standards. Typically, this critical assessment lasts for a span of 30 to 45 minutes. The duration is meticulously determined to allow examiners enough time to accurately assess a range of driving skills and the ability of the candidate to minimise the risk of accidents. It’s also important to note that there are typically several distinct test routes at each location to ensure a comprehensive evaluation of your driving skills.

Mastering the PS Driving Test:

Successfully passing your PS driving test involves several critical steps. Firstly, choose a vehicle you’re comfortable with, ensuring it is roadworthy and familiar to you. Regularly practice driving on different routes around the vicinity of the testing centre to build confidence and understanding of the road conditions.

Pay meticulous attention to your blind spots and always use your mirrors for safe navigation. Maintaining calmness during the test is essential, as it allows you to respond promptly and accurately to traffic situations.

Utilise your indicators properly, signaling your intentions to other road users in advance. Adhere to all road signs and rules, particularly stop signs, as neglecting them could lead to test failure. Lastly, demonstrate decisive gap selection in traffic – your ability to do this shows the examiner your competence and confidence as a driver.

The state Government has made driving tests tougher as part of an ongoing initiative to make our road drivers and road users safer. How to pass your driving test is a common thing to think about.

The on road driving test assesses your driving skills, decision making, awareness of other road users, and how you share the road with other traffic. If you pass the test you progress from a Learners licence to a P1 licence.

If you fail the test you must wait at least 7 days before you are eligible to redo the driving test.

How To Pass the Driving Test in NSW & Avoid Common Mistakes

A great way to improve your chances of passing the test is to learn the common driving mistakes that people make in the test.

There are a handful of mistakes that people commonly make in the driving test. In fact the majority of people who fail the driving test fail for similar reasons.

Whilst there are 18 fail items listed on the driving test score sheet the vast majority fail for the following reason.

how to pass the driving test nsw and start driving

Required Observation Checks

This is by far the most common fail item in a driving test at any test location. Three mistakes in this category will result in a fail for your driving test. Therefore it is essential that you know what your required observation checks are.

Blind spot checks are classified as a required observation check in the driving test. However blind spot checks are not the only required observation checks in a driving test.

Do you know when you are required to check your blind spots? Furthermore do you know when you are required to make an observation check whilst driving a car. It will be hard for you to pass the driving test if you do not know when you have to make a required observation check.

Signalling Intention

This is another category in the driving test where 3 mistakes will result in a fail. Therefore if you fail to signal your intention on 3 or more occasions it will be recorded as a fail item.

In order to avoid a signal error in the driving test you need to signal at the right time and for long enough. Generally speaking the minimum amount of time will depend on the situation. For example you must signal for at least 5 seconds before leaving a parking space.

In addition to having your indicator on for long enough you also have to indicate at the right time. For example putting your indicator on too early will create confusion for other drivers. This could be dangerous and you will be marked down for it. Remember doing anything that is dangerous can result in a fail for the driving test.

Stop and Give Way Procedures

The driving test is designed to test your ability to drive safely. Failing to stop at a stop sign or give way when required is dangerous and illegal. Anytime you do anything that is dangerous or illegal is an immediate fail in the NSW driving test.

Therefore failing to stop at a stop sign is an immediate fail. A lot of people slow down for stop signs and then when they can see that there are no cars they keep going. You must stop behind the stop line and your car must be stationery. After you have stopped behind the stop line, if your vision is obstructed and it is safe, you can move forward to improve your vision.

A lot of people also fail the NSW driving test for not stopping when required at pedestrian crossings. When there is a pedestrian at a marked pedestrian crossing with a stop line you must stop behind the line. You can not stop on the line or in front of the line.

how to pass your driving test in NSW

Decision Making

It is rare to see a person complete a driving test without losing points or failing for poor decision making. You are required to make good decisions  and follow the road rules. Everyone knows that you are not allowed to speed or that you have to obey the road signs including traffic lights.

Yet a lot of people fail for speeding or disobeying traffic lights including going through red lights. How can this be surely everyone knows that it is illegal to speed.

Unfortunately a lot of people get nervous in the driving test or distracted whilst they are driving. You need to focus on what you are doing now and you need to think about what is coming up in the next 12 seconds whilst you are driving. You need to think about what you are doing and what you need to do next.

Gap Selection

When you are driving you will need to decide if the gap is big enough for you to go. You make these decisions every time you turn a corner, change lanes, or decide to go at a stop sign or a give way sign.

In order to make this type of decision you have to estimate the speed and distance of other vehicles. In addition you have to estimate how long it will take you to complete your manoeuvre.

You need to complete your manoeuvre without entering the other vehicles crash avoidance space. Some learner drivers who are inexperienced at gap selection will pull out in front of another vehicle that is too close. Which would result in a fail for the driving test because they did not give way to the other vehicle.

Alternatively an inexperience driver would have a big enough gap to go and complete the manoeuvre safely. But they will hesitate and then go at the last second, when the gap was no longer big enough.

How to Pass Driving Test NSW with Learn To Drive Driving School

Our highly experienced driving instructors know how to prepare you for the driving test. It does not matter how much experience you have or how long you have been driving. You will be better prepared to drive safely and pass the driving test with Learn to Drive Driving School.

Some driving schools cover large areas and do driving tests at many RMS test centres. It is not possible for a driving instructor to know all the test tracks. Because each test location has between 4 and 10 test tracks you need a local driving instructor.

Because our driving instructors specialise in their local test location they:

  • Have an extensive knowledge of the local test tracks.
  • Know the difficult parts of each test track.
  • Know how the examiners assess the test.
  • Can teach you how to PASS THE TEST FIRST GO.

how to pass the driving test nsw by being prepared

How to Pass Driving Test NSW – The Day of the Driving Test

The pressure from family and friends to pass the driving test can be immense. In addition you want to pass the test and get the freedom that comes with having a driving licence. After completing the Driver Knowledge Test, 120 log book hours, 12 months as a learner and the Hazard Perception Test you want to pass the driving test.

Obviously there is a lot riding on this test and you want to make sure you pass First Go! Therefore it is important that you are relaxed and confident on the day of the test. The best way to be relaxed on the day of the test is to be prepared for the test.

Make sure you know everything you need to know. Ensure you spent your time wisely over the last 12 months and 120 hours of driving. Because if you are prepared with a good driving technique and good driving habits then you will be ready to pass the test.

Arrive on Time

When you book your driving test the Roads & Maritime Services tell you to be at the test centre 15 minutes early. If you are not there on time for your driving test you will not be allowed to do the test. You will have to re-book your driving test and come back another day.

Bring all your paperwork

You must bring all the required paperwork. The paperwork must be complete. For example if your log book has not been completed properly you will not be allowed to do the driving test.

To be eligible to take this driving test you must be:

  • At least 17 years of age.
  • Completed at least 120 hours of log book driving, including 20 hours of night driving.
  • Note: All drivers over 25 years are exempt from the 12 month tenure and log book requirements.

Make sure you know how to pass the test

Like any test you have to prepare for it to be able pass. This means you must know the road rules but more importantly how to apply those rules in real life situations. Because if you can not react correctly in fractions of a second you might have a car accident. Which would mean you would not pass the test. In a driving test anything that is dangerous is an immediate fail item.

Driving Test Overview

Your P’s driving test is scheduled to last 45 minutes. During this time you may be tested on many different driving skills including reverse parking, three point turns, lane changing, roundabouts, stop and give way procedures, cornering, hazard perception, defensive driving and many other topics.

The Learn To Drive Driving School has developed a Better Way driving program to ensure you gain all the skills and knowledge you need to be able to pass the driving test first go.

Pre Departure Check

Before you start your driving test the RMS examiner will conduct a safety check of the vehicle. All our cars are fully maintained to the high standards set by the RMS so you can relax when doing the test in one of our cars. However if you choose to do the test in your own car you need know that if the examiner finds a fault with the car they may terminate the test. This would mean that you will have to rebook the test for a later date and pay another booking fee.

How to Pass Driving Test NSW Know the Test Track

Each RMS testing centre has a number of test tracks and one of those test tracks is randomly selected for you to be tested on. Because each test track is different you will be tested on different driving skills on different test tracks. For example you will be tested on dual lane roundabouts at Penrith, whereas there are no dual lane roundabouts in Richmond. Therefore you will not be tested on dual lane roundabouts in Richmond, instead Richmond has a railway crossing.

Whilst the test is scheduled to last for 45 minutes you have to complete the test track and perform the required manoeuvres. Because your test may take more than the allocated time due to traffic or road works don’t worry if the test takes longer.

At the end of the test the examiner will give you your results.

How to Pass Driving Test NSW Checklist

  1. Learn how to pass the driving test from someone who actually knows what is in the test. Taking lessons from someone who did a driving test 20 plus years ago will improve your experience. However it is unlikely that they will know what is in the test or how to pass the test.
  2. Do a trial driving test with a local driving instructor to make sure you are ready for the test. Because you do not want to find out during the test that you are not ready for the test.
  3. Make sure your paper work is in order. You will be refused permission to do the test if your log book is incomplete or not filled in properly.
  4. Make sure your test car is ready for the test. The examiners regularly refuse to do driving tests because the car does not meet their standards.